8
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
• For double speed playback (without sound), press PLAY/X2 (w) again.
• To revert to normal playback, press
PLAY/X2 (w) again.
• To stop the video tape, press
STOP (r).
• To eject the tape press
EJECT on the VCR.
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation flashes on the on-screen
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
• Press
CHANNEL K or L to position picture interference off the TV screen. (Manual
Tracking)
• Press
CHANNEL K and L buttons together to start Auto Tracking.
PAUSING AND SLOW MOTION
1.
Press PLAY/X2 (w) to start the video tape playing.
2. To pause the video tape, press PAUSE/STILL (II) .
• To minimise jitter whilst in pause mode press
CHANNEL K or L.
• Press
PLAY/X2 (w) to resume playback.
3. To playback in slow motion (without sound) press Iw SLOW on the remote control. Slow
motion speed can be adjusted using the
— or ± buttons next to the Iw SLOW button.
Picture disturbance can be improved by using the
CHANNEL K or L during slow
motion playback.
• Press
PLAY/X2 (w)to resume playback.
NOTES:
• When using SLOW MOTION function some mechanical noise may be heard.
• There will be picture interference and possibly a change to black and white picture
using Pause and Slow functions.
• PAUSE mode will disengage after about 5 minutes.
To Next Page
Loading...
