11
BASIC OPERATION
HOW TO USE THE SHOWVIEW
®
SYSTEM TO MAKE A
RECORDING
• If appears on the VCR display, press TIMER ON/OFF before starting.
• Check that the clock is displaying the correct time.
The SHOWVIEW® system allows you to program the
VCR to record up to eight programmes using the
S
HOWVIEW numbers published in TV listings.
1. Press [SV/V+/TIMER] on the remote control
2. Enter the SHOWVIEW number from the TV
listing using the
NUMBER BUTTONS.
NOTE:
3.
Press [K/L] to select ONCE, WEEKLY, DAILY
4. If you want to make additional recordings at the same time each day or week, then use
[
H/J] to select the WEEKLY, or DAILY option as appropriate.
5. Press SET to confirm.
NOTE:
The first time that you use the SHOWVIEW system to
make a recording on each channel Preset, (PR)
may be highlighted on the menu.
6. Enter the channel you wish to record using
the
NUMBER BUTTONS, for example if
you wish to record channel 2 press
0 2. The
VCR will remember this for the future.
NOTES:
• An ERROR message will appear if you have entered a number that is not a current
S
HOWVIEW number. If this happens press CLEAR to delete the numbers as required and
enter the correct S
HOWVIEW number
• Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR to return to the SHOWVIEW system menu, and re-enter the correct SHOWVIEW
number
You may also access the SHOWVIEW system menu by the following procedure:
i. Press MENU.
ii. The SHOWVIEW system option will be highlighted. Press SET to confirm.
Continue from step 2 above.
To Next Page
Loading...
