Sharp VE-CG40U

Preparation
12
Preparation
Using the Wrist Strap
Attach the wrist strap to the wrist strap loop
as shown below.
Notes:
• Make sure the wrist strap attaches firmly to the
wrist strap loop.
• Do not swing the camera by the strap.
Using the Lens Cap
Attach the strap of the lens cap to the wrist
strap as shown below.
Always attach the lens cap when not using
the camera.
Note:
• Remove the lens cap before you power on the
camera. The camera may freeze if the lens cap
remains attached. In such case, press the Power
button to power off, remove the lens cap and
press the Power button again to power on.
VE-CG40U-007-012 02.8.27, 7:28 PM12