Sharp VE-CG40U

32
Useful Features
Capturing
Useful Features
Capturing a Still Image
with Sound
Available in [, ], ;, ', , or . mode
You can record up to 10 seconds of sound
while capturing each still image. The built-in
microphone is used for sound recording.
1 Turn on the camera in the desired mode.
2 Press the MENU button until the menu
screen appears.
3 Press l or m to select “P”, then
press the SET button.
4 Press l or m to select “VOICE REC.”,
then press the SET button.
5 Press l or m to select “ON”, then press
the SET button.
WHI TE BALANCE
BAL ANCE
SENS I T IV I TY
GAMMA
MET E R I NG
RETURN
QUICK VIEW
CAPTURE 2
OFF
ON
VOI CE REC.
BALANCE
OFF
ON
VOI CE REC.
6 Press the MENU button to turn off the
menu screen.
7 Capture the still image (see page 13).
• The camera captures a still image with
10 seconds of sound.
To quit the sound recording manually
Press the Shutter button.
Notes:
• See page 40 for previewing a still image with
sound.
• You can only record with sound when the
SHOOTING MODE menu is set to SINGLE.
• If an image has a sound file attached, the image
protection setting will protect both files.
Microphone
VE-CG40U-023-032 02.8.27, 7:31 PM32