Sharp VE-CG40U

38
Useful Features
Previewing
Useful Features
Deleting All Images
Available in w mode
You can delete all stored images on a card
following the steps below.
1 Set the Mode Dial to “w”, then power
on the camera.
2 Press the MENU button until the menu
screen appears.
3 Press l or m to select “w”, then press
the SET button.
4 Press l or m to select “DELETE ALL”,
then press the SET button.
5 Press l or m to select “YES”, then
press the SET button.
Notes:
• Protected images are not deleted in this
procedure. To delete a protected image, first
cancel its protection setting. (see page 33).
• DELETE ALL also erases the DPOF (print order
information for all images including protected
ones (see page 36).
• It may take several seconds to delete all images
from the card.
• Do not turn the power off during the deletion
process.
IMAGE EFFECT
SL I DE SHOW
PRINT
ORDER
DUBB I NG
RETURN
PROTECT
PREV I EW
DELETE ALL
YES
NO
DEL ETE ALL
DEL ETE ALL
IMAGES
EXCEPT PROTECTED?
VE-CG40U-033-040 02.8.27, 7:32 PM38