Operation References
4
Quick Reference List
Below are some examples of camcorder’s features.
•To record the subject with higher-quality audio.
— See page 28 (Selecting the 16-bit Audio Recording Mode)
•To record powerful close-up images.
— See page 29 (Setting the Digital Zoom)
•To record a backlit subject.
— See page 30 (Gamma Brightness Compensation) or page 42 (Manual
Exposure)
•To record subjects in very dim conditions, e.g. a nocturnal animal.
— See page 32 (Night Recording)
•To quickly return the tape to the end of the last recorded scene after playback.
— See page 34 (Quick Return)
•To record yourself in the scene while monitoring the shot.
— See page 39 (Letting the Subject Monitor the Shot)
•To focus on an off-centred subject.
— See page 43 (Manual Focus)
•To turn off the confirmation sounds which are made when you operate the
camcorder.
— See page 49 (Setting the Confirmation Sounds)
•To enlarge any part of the picture during playback.
— See page 51 (Playback Zoom)
•To brighten the dark portion of the playback images without changing the bright
portion.
— See page 52 (Gamma Playback)
To Next Page
Loading...
