ii
Easy Camera Recording
1 Make sure that a cassette is inserted.
2 Remove the lens cap, and lift up the
viewfinder.
3 Hold down the Lock button
and set the Power switch to
CAMERA.
4 Press the REC START/STOP button to
begin recording.
Lock button
REC
Power Zoom
control
Tape Playback
1 Press the LCD monitor OPEN release
button (1), and open the LCD monitor
to a 90° angle to the camcorder body
(2).
2 Adjust the LCD monitor to an angle that
allows easy viewing on the on-screen
picture.
90
3 Hold down the Lock button
and set the Power switch to
VCR.
4 Press e (or r) on the Operation
button to rewind (or fast forward) the
tape to the desired point.
5 Press y to begin playback.
AUDIO
12
+
AUDIO
12
+
To stop playback
Press d.
Zooming
Push the Power Zoom control to T (1)
(telephoto) or W (2) (wide angle) side.
LCD monitor OPEN
release button
Lock button
To Next Page
Loading...
