Sharp ViewCam VL-WD250S

Useful Features
Playback
Useful Features
41
Using the Time Code
The time code shows the hour, minute and
second of recording, and the frame number
(1 frame = approx. 1/25 sec.). This is automati-
cally recorded along with the subject. You can
display the time code on the screen as an
accurate counter in both VCR and CAMERA
modes.
Frame number*
Display format
0 00 10 20TC
• The example screens for this feature are for VCR
mode.
1 During playback or recording, press the
MENU/DISPLAY button until the menu
screen appears.
2 Select I, then press r on the
Operation button. Select “TIME CODE”
(1), then press r (2).
3 Press d or y to select “DISP. ON”,
then press e.
4 Press the MENU/DISPLAY button to
turn off the menu screen.
• The time code appears.
DISP.OFF
DISP.ON
OTHERS
REMOTE
SOUND
TIME CODE
TC OUT
DISP.ON
TIME CODE
SP
TC0 05:35:
To turn off the time code
Select “DISP. OFF” in step 3 above.
Note:
• When the tape reaches an unrecorded section,
the time code returns to zero (TC0:00:00). Once
recorded, the time code cannot be changed.
Displaying the time code on a TV
during playback
1 In VCR mode, select I, then press r
on the Operation button. Select “TC
OUT” (1), then press r (2).
OFF
ON
OTHERS
REMOTE
SOUND
TIME CODE
TC OUT
2 Press d or y to select “ON”, then
press e.
ON
TC OUT
Second
Minute
Hour
* Displayed during still
or frame advance
playback.
Time code