Preparation
12
ENGL ISH
LANGUAGE
DEUTSCH
FRAN
Ç
AIS
AUTO
SET [ BUTTON]
Selecting the Language for
the On-screen Display
This camcorder allows you to choose from
among English, German or French for the on-
screen display language.
MENU/DISPLAY button
Power switch
Operation button
Setting the Language
When using the camcorder for the first time,
select the desired language for the on-screen
display by performing the procedure below.
LCD monitor
OPEN release
button
1 Press the LCD monitor OPEN release
button (1) and open the LCD monitor
(2).
3 Press d or y (1) on the operation
button to select the desired language,
then press e (2).
Changing the Language
1 Set the camcorder to CAMERA mode.
2 Press the MENU/DISPLAY button until
the menu screen appears.
3 Select I, then press r on the
Operation button. Select “LANGUAGE”
(“SPRACHE” or “LANGUE”) (1), then
press r (2).
• The language selection screen appears.
4 Perform step 3 in “Setting the
Language”.
• The menu screen is displayed in the
language selected.
ENGL ISH
LANGUAGE
DEUTSCH
FRAN
Ç
AIS
REMOTE
SOUND
TIME CODE
TC OUT
D EMO MOD E
LANGUAGE
ENGL ISH
OTHERS
SET [ BUTTON]
2 Hold down the Lock button
and set the Power switch to
CAMERA.
• The language selection screen
appears on the LCD screen.
Lock button
Note:
• The English, German and French portions
of this operation manual are based on the
use of on-screen displays in their respec-
tive languages. The portions of this manual
in other languages, however, are based on
the use of English on-screen displays.
5 Press the MENU/DISPLAY button to
turn off the menu screen.
To Next Page
Loading...
