Sharp VL-E39S

Vl-E39S
3-3. Removing the LCD unit
n
(1)
Claw (A):a2 ') k
Claw
(A) 2
bJ I : '-L---
Cl
_----------'~ I ~ ()
Prism sheet
Diffusion sheet
Light guide plate
Reflection sheet
1. Disengage two claws, and
remove the lamp unit (1)from
the LCD holder (2).
2. Remove the sheets from the
LCD holder (2).
3. Pull the LCD holding sheet
(3).
4. Disengage the claw (8), and
slide the LCD panel (4) inthe
(C) direction to remove the
LCD holder (2).
Note:
At this time, be careful so that
the FPC of LCD panel (4) is not
damaged by the claw (D).
When handling the prism sheet,
diffusion sheet, light guide plate,
andreflectionsheet, donottouch
any parts other than lugs and
sides.
(3)
(2)
-rf----f----(4)
o 0
~--r--4._H---(3)
v(C)
o
3-7