Sharp VL-PD6H Quick Operation Guide

CAMCORDER QUICK OPERATION GUIDE
Charging the Battery Pack
Please consult the supplied operation manual for further details on these and other functions of your camcorder.
1 Connect the power cord to the AC
power socket on the AC adapter/
battery charger, and insert the AC
plug into a power outlet.
• The POWER indicator lights up.
2 Align the ƒ mark on the battery
pack with the
∂
mark on the
charger (Q) and guide the battery
into the groove. Pressing the battery
(W), slide it in the direction of the
arrow (E) until it locks into place.
• The CHARGE indicator lights up.
Q
W
CHARGE indicator
Q
W
EE
To power
outlet
AC power socket
POWER indicator
3 When the battery is fully charged,
the CHARGE indicator goes off.
Slide the battery pack in the
direction of the arrow (Q) and
remove it (W). Then, remove the AC
plug of the power cord from the
power outlet.
Attaching and Removing the Battery Pack
1 Make sure that the Power switch is
set to OFF.
4 Lower the viewfinder (Q), and push
it in completely (W).
Q
W
Q
W
Q
W
Power source
connection panel
Q
W
Power source
PUSH release
button
Attaching the Battery Pack
2 Place your finger in the indented
section and pull out the viewfinder
horizontally (Q), and then lift it up
(W).
3 Align the mark on the side of the
battery pack with the ß mark on the
camcorder (Q), and slide the battery
pack down completely until it locks
into place (W).
Removing the Battery Pack
Perform steps 1 and 2 at left under
Attaching the Battery Pack, then
press the power source PUSH release
button (Q), and slide the battery pack
up and take it out (W).
Inserting and Removing a Mini DV Cassette
1 Supply power to the camcorder, then
slide the cassette compartment door
release and open the cassette
compartment door.
• A confirmation sound is made, and
the cassette holder extends and
opens automatically.
3 Press the PUSH mark gently until
the cassette holder clicks into place.
• A confirmation sound is made, and
the cassette holder retracts
automatically.
Inserting a Cassette
2 Insert the cassette fully with the
window facing outwards, and with
the erasure protect tab facing
upwards.
Cassette compartment
door release
Erasure
protect tab
SAVE
REC
SAVE
REC
PUSH mark
4 Wait for the cassette holder to fully
retract. Close the compartment door
by pressing the centre until it clicks
into place.
Removing a Cassette
Perform step 1 at left under Inserting a
Cassette, then take out the cassette.
Inserting and Removing a SmartMedia Card
1 Make sure that the Power switch is
set to OFF.
3 Insert a SmartMedia card into the
slot with the contact area facing in
and with the chipped corner facing
down, and push it in as far as it will
go.
Inserting a SmartMedia Card
2 Slide the card slot door release in
the direction of the arrow.
• The card slot door is opened.
Card slot door
release
Contact area
Chipped
corner
4 Close the card slot door.
Removing a SmartMedia Card
Perform steps 1 and 2 at left under
Inserting a SmartMedia Card, and
then pull the SmartMedia card straight
out.
TINSE0368TAZZ
Web-site: www.sharp.co.uk/support Help Line UK : 08705 274277
Ireland: (01) 676 0648
VL-PD6H/Guide 01.4.24, 1:07 PM1

Sharp VL-PD6H Specifications

General

Brand	Sharp
Model	VL-PD6H
Category	Camcorder
Language	English