To Next PageTo Next Page
Need help?Do you have a question about the Sharp VL-PD1U and is the answer not in the manual?
General| Optical Zoom | 10x |
|---|---|
| LCD Screen Size | 2.5 inches |
| Media | Mini DV tape |
| Image Sensor | 1/6 inch CCD |
| Effective Pixels | 680, 000 |
| Battery Life | Approx. 90 minutes |
Safety checks to perform before returning the video camera to the user.
Details specifications for the AC adapter and battery charger unit.
Details specifications for the battery pack.
Details specific jigs for checking and adjusting the camcorder mechanism.
Lists parts needed for routine inspection and maintenance of the mechanism.
Table outlining maintenance tasks, intervals, and indicators for mechanical components.
Important precautions to ensure correct and safe maintenance procedures.
General precautions to observe before performing mechanical adjustments and checks.
Procedures to check winding torque in playback, recording, and rewinding modes.
Procedures for checking reel base height and back tension torque.
Procedure to check and adjust the tension roller position during record/playback.
Procedures to check S reel base no-load torque and loading back tension.
Procedures to check rewinding back tension and pinch pressing force.
Identifies adjustment points and covers running height adjustment for guides and rollers.
Outlines necessary preparations and tools for tape running adjustment.
Details rough adjustments for guide roller height, waveform, and tape wrinkles.
Final adjustments for guide roller height and playback SWP.
Important precautions for disassembling and reassembling the mechanical section.
Explains EJECT and STANDBY modes of the mechanism operation.
Details the removal and installation of the cassette controller assembly.
Procedure for operating the unit without the cassette controller assembly attached.
Procedure for matching phases of various cams and switches for proper operation.
General instructions for reassembling the main chassis.
Detailed instructions for reassembling the slide chassis side.
Method for assembling the main chassis and slide chassis together.
Details the application of grease and oil to various parts during assembly.
Procedure for removing the cassette from the mechanism.
Guidance before adjustments and setting digital interface ID.
Configuration, specs of service jigs, and test points diagrams.
Adjustments for servo system controller, shutdown voltage, and HSWP.
Adjustments for electromagnetic conversion circuits and phase/equalizer.
Adjustments for Video I/O, AGC, and Frame Lock circuits.
Adjustments for LCD circuits including VCO, DAC, COM-Bias, White Balance, Lamp.
Adjustments for View Far circuit including VF VCO, Bright, Contrast, Gamma.
Adjustments for touch panel, microphone amplifier, and DV interface ID.
Overview of camera service, tools, and preparations.
Lists specific jigs and tools required for camera adjustments.
Provides preparations and steps for adjusting the camera unit.
Explains camera unit adjustment modes like auto-focus and signal system.
Lists the sequence of camera unit adjustment procedures and replacement methods.
Detailed procedures for auto-focus and basic iris adjustments.
Procedures for black balance, AE, white balance, and color gain adjustments.
Procedure for auto white balance adjustment using a color temperature filter.
Lists common problems and relevant circuits for diagnosis.
Signal flow diagram for the EE mode in video processing.
Signal flow diagram for the REC mode in video processing.
Signal flow diagram for the Playback (PB) mode in video processing.
Signal flow diagram for the REC mode in audio processing.
Signal flow diagram for the Playback (PB) mode in audio processing.
Overall system block diagram showing interconnected modules and ICs.
Block diagram detailing the camera section components and connections.
Block diagram illustrating the PPW section components and data flow.
Block diagram showing the CODEC section and its connections.
Block diagram of the audio and digital output sections.
Block diagram detailing the camera circuit architecture.
Layout diagrams for the main PWB, showing component and wiring sides A and B.
Layout diagrams for the camera head PWB, showing component and wiring sides A and B.
Layout diagrams for the camera power PWB, showing component and wiring sides A and B.
Layout diagrams for the DV PWB, showing component and wiring sides A and B.
Layout diagrams for the Gyro PWB, showing component and wiring sides A and B.
List of electrical replacement parts with part numbers and descriptions.
List of printed wiring board assemblies, not intended for replacement.
Lists integrated circuits and transistors with part numbers and descriptions.
Lists diodes, LEDs, and packaged circuits with part numbers.
Lists coils, transformers, and capacitors with part numbers and specifications.
List of resistors with part numbers, descriptions, and codes.
Lists miscellaneous parts, connectors, and cabinet parts.
Detailed list of cabinet parts with part numbers and descriptions.
Exploded view of the mechanism chassis with numbered parts for identification.
List of individual mechanism parts with part numbers and descriptions.
List of cassette control parts and an exploded view of the assembly.
Exploded view of the camcorder cabinet and its components.
List of parts for the camera unit with part numbers.
Exploded view of the camera unit assembly.
Lists and specifies jigs used for checking and adjusting the mechanism.
Lists jigs for camera adjustments and their specifications.
