Sharp VL-PD1U - Slide Chassis Reassembly

VL-PDl U
9-5-2. Reassembly in side of the Slide chassis.
Note) Numbers before part names are given as a guide to the order of assembly.
As for greasing/oiling/cleaning places refer to the attached drawings (3 and 4).
Fit the main brake SPR from
above, and close with the hook.
n /\
(3)
(3) one pc.
(7) one pc.
(8)
I
one pc.
I
(8)
0
456
*@Tightening torque
40 + 4mN.m
(0.4 +_ 0.04kgocm)
(3
382 @)
(2)
P
382
,Grea
Tightening torque
40 + 4mN=m
(0.4 + 0.04kggcm)
Note) Be careful not to scratch or denttithe
---14
be careful not to deform the tension
band in handling it.
9-l 1