Sharp VL-SD20U - Disassembly Ofthe Set

VL-SD2OU
4. DISASSEMBLY OFTHE SET
Note:
Before removing the cabinet, turn off the power supply, and ascertain that the battery have been removed.
Remove the screws ((u)LX-HZ0050TAFN)(lpc.) and
. Remove the screws ((e)XiPSF17PO4000)(2pcs.) fixed the lens
((e)XiPSF17PO4000)( 1 PC.) fixed the camera back cabinet.
fitting and remove the lens unit.
>
_.
6.
P)
Remove the screws ((p)LX-BZO224TAFN)(2pcs.) fixed the
camera front cabinet.
3.
. Remove the screws ((a)XiPSF17P02000)(1pc.) fixed the cam-
era side cover and remove the camera side cover.
7.
(e)
Remove the screws ((u)LX-HZ0050TAFN)(lpc.) and
((e)XiPSF17P04000)(1pc.) fixed the camera side cover.
. .
(e)
. Remove the screws ((e)XiPSF17P04000)(5pcs.) fixed the
bottom cover.
8.
(f)
(P)
Remove the screws ((p)LX-BZ0224TAFN)(lpc.) fixed the
camera back cabinet.
Remove the screws ((f)XiPSN17PO4000)(2pcs.) fixed the
LCD cabinet.
4-1