Sharp XE-A102 - Programming Department Status; Basic Sales Entry

XE-A102 TEST FUNCTION
– 9 –
5. PRINTER TEST
1) KEY OPERATION
2) TEST PROCEDURE
With the above key operation , the print test pattern is repeatedly
printed.
Pressing any key will terminate the test after the completion of one
cycle print. (The receipt is issued at the end.)
6. CPU VERSION NO. PRINT
1) KEY OPERATION
2) DESCRIPTION
The CPU version No. are printed with above key operation.
(Print example)
0102 CPU version NO.
06
This test is terminated when printing is completed.
7. BATTERY VOLTAGE SENSOR TEST
1) KEY OPERATION
2) TEST PROCEDURE
Displays A/D conversion port read value.
0155 or greater : Normal
0154 or smaller : Low battery display
0138 or smaller : No battery display and MRS is done when power on.
To terminate the test, press any key.
Completion print 07
8. TIME DISPLAY TEST
1) KEY OPERATION
2) TEST PROCEDURE
To terminate the test and print the date and time, press any key.
9. DESTINATION DISPLAY
1) KEY OPERATION
2)TEST PROCEDURE
Display the destination code as follows.
Display X (X:0)
To terminate the test, press any key.
Completion print 09
PO5
PO6
PO7
U and A version V version Japan
Display 0 1 3
PO8
8
Display
Hour
Minute
Second
Turn on and off(0.5s)
7
54 2136
Print
Year Month Date Hour M
inute
Second
0 8
X
X
XXXX XXXXXX
PO9