EasyManua.ls Logo

Sharp XEA147BK - Page 11

Sharp XEA147BK
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
XEA147BK and XEA147WH Frequently Asked Questions Page 11 of 21
How do I stop the Electronic Journal near full error symbol from dispalying?
7. Set the mode key to the Z/PGM position
8. Enter:
#/TM/ST 6 8 _/RCPT/SW 1 0 1 _0_ 0 0 1 0 #/TM/ST TL/AT/NS
This will cause the near full symbol for the Electronic Journal (EJ), not to display. The EJ near full
warning symbol is a displayed right below the 7
th
and 8
th
places on the display. If this warning is
disabled records in the EJ will be deleted on a first in first out (FIFO) basis. The EJ has a 3000 line
capacity.
How do I give a department a descriptive name?
1. Set the mode key to the Z/PGM position
2. Enter: #/TM/ST -1- -0- -1- _/RCPT/SW_ DEPT KEY enter characters
#/TM/ST TL/AT/NS
For example to enter ‘SNACKS’ as the department’s description
Enter: : #/TM/ST -1- -0- -1- _/RCPT/SW_ -8- 2
6
-3- 2
6
-0- 1
5
-2- 1
5
-0- 2
6
-8- 2
6
#/TM/ST TL/AT/NS
You can enter up to 12 characters with the function and department keys. You will see the
letters of the Alphabet that a key covers in the bottom right hand corner of the key.
You can also enter text using 3 digit codes. Please refer to the full instruction manual (pages 43 -44)
for details. The character table for using the department and function keys is shown on the next page.

Related product manuals