Sharp XG-P610X Setup Manual

-27
Confirming the Projector
Status (Status)
On this screen, you can confirm the projector
status. You can confirm the following items :
••
••
• MAC Address
••
••
• Power
••
••
• Condition
••
••
• Lamp Timer 1
••
••
• Lamp Timer 2
••
••
• Lamp Life 1
••
••
• Lamp Life 2
••
••
• Input
••
••
• Signal Info
••
••
• Serial Number
Note
• If you click the “Refresh” button before the
screen is displayed completely, an error
message (“Server Busy Error”) will be dis-
played. Wait for a moment and then oper-
ate again.
• For details about each item, refer to the
projector’s operation manual.
Controlling the Projector via LAN
Controlling the Projector
(Control)
On this screen, you can perform projector con-
trol. You can control the following items :
••
••
• Power
••
••
• Input Select
••
••
• Volume
••
••
• Mute (Audio)
••
••
• Shutter
Note
• If you click the “Refresh” button before the
screen is displayed completely, an error mes-
sage (“Server Busy Error”) will be displayed.
Wait for a moment and then operate again.
• You cannot operate this page while the pro-
jector is warming up.
• While the projector is in standby mode, you
can only control “Power ON”.
• For details about each item, refer to the
projector’s operation manual.

Sharp XG-P610X Specifications

General

Brand	Sharp
Model	XG-P610X
Category	Projector
Language	English