Sharp XG-PH50X - Connecting with a DVI Digital Cable

Connections
-29
Connecting with a DVI Digital Cable
The projector employs the DVI digital input terminal for direct input of digital video signals
from a computer.
Note
• When connecting the projector to a computer in this way, select “D. PC RGB” for “Signal Type” in the
“Picture” menu.
• When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm
stereo audio cable.
Computer
Side view
ø3.5 mm stereo or mono audio cable
(commercially available or available as
Sharp service part QCNWGA038WJPZ)
To INPUT 3 terminal
DVI Digital cable
(commercially available)
To DVI digital
output terminal
To audio output
terminal
To AUDIO input
(2, 3) terminal