Sharp XG-PH50X - Connecting with an S-Video Cable or a Composite Video Cable

-34
Connecting with an S-video Cable or a Composite Video Cable
Connect the video equipment to the INPUT 4 or 5 terminal using the S-video cable or com-
posite video cable (commercially available).
Note
• The S-video signal input to the S-VIDEO terminal is separated into color and luminance signals for real-
izing a higher-quality image.
• An RCA audio cable (commercially available) is required for audio input.
• When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com-
mercially available cable that fits in the projector terminal you want to connect.
RCA audio cable (commercially available)
To video output
terminal
Composite video cable (commercially available)
To INPUT 5
terminal
To AUDIO input
(4, 5) terminals
To audio output
terminals
To S-video
output terminal
S-video cable (commercially available)
To INPUT 4
terminal
Video Equipment
Side view
Connecting to Video Equipment