16
Easy Start
This section shows the basic operation (projector connecting with the computer). For details,
see the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
3, 8 STANDBY/ON button
6, 7 ENTER button
6 R/P buttons, 7 INPUT buttons
6 O/Q buttons
6 KEYSTONE
button
8 STANDBY button
3 ON button
7 HDMI,
COMPUTER 1/2,
S-VIDEO, VIDEO
buttons
4, 6 Adjustment
buttons
(P/R/O/Q)
6 ENTER button
3 H&V SHIFT button
5 FOCUS buttons
5 ZOOM buttons
1. Place the projector facing a wall or a screen
B
P. 18
When connecting equipment other than a computer, see pages
23 and 24.
2. Connect the projector to the computer and plug the power
cord into the AC socket of the projector
BPP. 22, 25, 26
Press STANDBY/ON on the projector or ON on the remote control.
3. Turn the projector on
BP. 27
To Next Page
Loading...
