30
Image Projection (Continued)
Adjusting the Focus
Press FOCUS +/– on the remote
control to adjust the focus.
ROn-screen display
TESTPATTERN
FOCUS
Info
It is recommended that the focus be adjusted
after the projector has warmed up for at least
30 minutes.
•
Adjusting the Projected
Image Size
Press ZOOM +/– on the remote
control to adjust the projected image
size.
ROn-screen display
TESTPATTERN
ZOOM
After you have pressed FOCUS or ZOOM on
the remote control, you can display the test
pattern by pressing ENTER. The test pattern
is useful for making more accurate
adjustments.
For fi ne adjustments, when H&V SHIFT,
FOCUS or ZOOM is pressed, the projected
image moves a small amount in the desired
direction for approximately one second. Hold
down the buttons to move the projected
image quickly.
•
•
Note
ZOOM buttons
FOCUS buttons
To Next Page
Loading...
Need help?
General
