– 4 –
FM stereo mode indicator
FM stereo receiving indicator
■ If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may mal-
function.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
2. If the unit is not restored in step 1, unplug and plug in
the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the following:
1 Press the ON/STAND-BY button to enter the power
stand-by mode.
2 Unplug the AC power lead from the AC INPUT socket
on the unit.
3 Whilst pressing down the MEMORY/SET button and the
0606
0606
06 button, plug the AC power lead into the AC INPUT
socket on the unit.
■
Maintenance
Do not touch the laser pickup lens. If fingerprints or dust accu-
mulate on the pickup, clean it gently with a dry cotton swab.
Listening to the Radio
1
Press the FUNCTION button until “FM” or “AM” appears
on the display.
2
Press the TUNING (
XX
XX
X or
WW
WW
W) button to tune in to the de-
sired station.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first receivable
broadcast station.
3
To receive an FM stereo
transmission:
Press the FUNCTION but-
ton to display the “ST” in-
dicator.
● “j” will appear when an
FM broadcast is in stereo.
XL1500_QG 01.12.17, 2:20 PM4
To Previous Page
Loading...
