Sharp XL-DK227NH - Radio; Enhancing Your System

33
2008/June/13 XL-DK227NH/DK257NH_AUS
XL-DK257NH
XL-DK227NH
Advanced Features
Timer and sleep operation (Remote
Control only) (continued)
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
 To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Enhancing your system
The connection lead is not included. Purchase a commercially
available lead as shown below.
1 Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or button to select
“SLEEP OFF”, and press the MEMORY button.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 10, pages 30 - 31).
Timer playback start time
Sleep operation will
autimatically stop
Timer playback setting
Sleep timer setting
End time
Desired time
1 minute - 3 hours
TV
Portable audio player, etc.
Video cable
(not supplied)
To video
input socket
Yellow
Yellow
Audio cable
(not supplied)