Sharp XL-HP500W - Radio Operations; Tuning and FM Stereo Reception

02/8/6 XL-HP500W(A)2.fm
E-18
ENGLISH
XL-HP500W
Radio
Listening to the radio
!
Tuning
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
"
" " will appear when an FM broadcast is in stereo.
"
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monau-
ral, and the sound becomes clearer.
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING/TIME ( or ) button to tune in to the de-
sired station.
Manual tuning:
Press the TUNING/TIME button as many times as required to
tune in to the desired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
"
When radio interference occurs, auto scan tuning may stop
automatically at that point.
"
Auto scan tuning will skip weak signal stations.
"
To stop the auto tuning, press the TUNING/TIME button
again.
FM stereo mode indicator
FM stereo receiving indicator