Sharp XL-MP10H - System Precautions and Care

XL-MP10H
3 – 1
AudioXL-MP10HService ManualXLMP10HMarketE
CHAPTER 3. MECHANICAL DESCRIPTION
[1] DISASSEMBLY
Note 1:
After removing the connector for the optical pickup from the connector,
wrap the conductive aluminium foil around the front end of the connec-
tor so as to protect the optical pickup from electrostatic damage.
Caution on Disassembly
Follow the below-mentioned notes when disassembling the unit and
reassembling it, to keep it safe and ensure excellent performance:
1) Take cassette tape and compact disc out of the unit.
2) Be sure to remove the power supply plug from the wall outlet
before starting to disassemble the unit.
3) Take off nylon bands or wire holders where they need to be
removed when disassembling the unit. After servicing the unit,
be sure to rearrange the leads where they were before disas-
sembling.
4) Take sufficient care on static electricity of integrated circuits and
other circuits when servicing.
STEP REMOVAL PROCEDURE FIGURE
1 Top Cabinet 1. Screw...........................(A1) x 5
2. Socket
.......................... (A2) x 2
3. Flat Cable....................(A3) x 1
1
2 Side Panel 1. Screw...........................(B1) x 4 1
3 Rear Panel/Main
PWB
1. Screw..........................(C1) x 2
2. Screw..........................(C2) x 2
1
2
4 Main PWB 1. Screw..........................(D1) x 2
2. Socket.........................(D2) x 2
3. Socket.........................(D3) x 1
2
5 Front Panel 1. Screw...........................(E1) x 2 3
6 Power PWB 1. Screw...........................(F1) x 2
2. Screw...........................(F2) x 1
3
7 Display PWB 1. Knob............................(G1) x 1
2. Screw..........................(G2) x 8
4
8 Tape Mechanism 1. Screw..........................(H1) x 1
2. Screw..........................(H2) x 4
4
9 Switch PWB 1. Screw...........................(J1) x 1
2. Hook............................(J2) x 2
5
10 CD Mechanism
(Note1)
1. Screw...........................(K1) x 4 5
Figure 1
Figure 2
Figure 3
(A3)x1
(A2)x2
Top Cabinet
Open/Close
Switch PWB
CD Mechanism
Side Panel
(Right)
Rear Panel
(C1)x2
ø3x12mm
Side Panel
(Lift)
(A1)x1
ø3x12mm
(A1)x2
ø3x12mm
(A1)x1
ø3x12mm
(A1)x1
ø3x12mm
(B1)x2
ø3x12mm
(B1)x2
ø3x12mm
Top Cabinet
(D1)x2
ø3x10mm
(D2)x1
(C2)x2
ø3x10mm
(D2)x1
(D3)x1
Main PWB
Power PWB
(E1)x2
ø3x8mm
(F1)x2
ø3x13mm
(F2)x1
ø3x10mm
Power
PWB
PWB
AC cord
Front Panel