SL-C1000/3x00 Quickstart ///TRIsoft OHG
SHARP SL-C1000/3x00 Page 13
Hard-Reset
There is a reset button hidden In the battery compartment. Should the device “hang” after
intensive Linux sessions you may reset it here.
Remove the battery cover as described on page 9. You will see a small black button in
the upper third, left side of the compartment :
Take the stylus and give the button a short prick - Reset done.
One-Handed Use
The controls at the left side offer a fast and convenient navigation, if the display is turned
over, onto the keyboard.
To Next Page
Loading...
Need help?
General
