SL-C1000/3x00 Quickstart ///TRIsoft OHG
SHARP SL-C1000/3x00 Page 27
Now it is nearly done, the "Backup/Restore" dialog should be visible:
The upper selection handles "Backup", the lower "Restore". Therefore, set the blue
sphere in front of the second line. The frame below selects the source of the backup
(CompactFlash, SD or in case for the SL-C3x00 also the HD).
Next choose the backup set to be restored in the right dropdown box.
Push the middle button at the bottom, when the desired backup can be seen in the
selection to the right. Another dialog appears and asks for confirmation (Yes, you are
sure):
Click the left button and the time of Kanji on the Zaurus will be over for the time being.
While restoring the backup, the "CG-Silicon" screen appears for a moment, then a
progress bar, which hopefully will reach 100%.
Afterwards the Zaurus restarts and it is done!
To Next Page
Loading...
Need help?
General
