1. Slide open the small battery compartment cover located on
the bottom of the clock.
2. Insert one CR2032 battery observing +/- polarities diagram
inside the battery compartment.
3. Close the battery cover.
Battery Installation for Alarm/Backlight/Flashlight
1. Slide open the AA battery cover located on the bottom
of the clock.
2. Insert six AA batteries (purchase separately) observing +/-
polarities diagram located inside battery compartment.
3. Close the battery cover.
Note: The alarm, screen backlight and flashlight are powered by
the included 6V DC adapter or by six AA alkaline batteries
(purchase separately).
Clock Battery Replacement
6
To Next Page
Loading...
