13
English
FABRIC STEAMING
CAUTION: When steaming any material for the first time, it is recommended
that you test on a small inconspicuous area before proceeding. Do not use on
synthetic fabrics such as 100% nylon or polyester, or other steam-sensitive
materials.
NOTE: Be sure the Water Tank has already been filled before following
these steps.
1. Plug power cord into a standard electrical outlet.
2. Power on and wait approximately 30 seconds until the Steam Status
Light turns from red to green, indicating the unit is ready to use.
3. Direct Steam Nozzle towards fabric material you wish to steam. See
below for additional tips and procedures.
CAUTION: Always be sure that Steam Nozzle is pointed in a safe direction
(away from yourself, other people, pets and plants) when steaming.
STEAMING GARMENTS:
•
Hang garment from a clean, rust-free hanger.
•
Direct Steam Nozzle towards bottom of garment. Steam will rise
along inside and outside of material, removing wrinkles. Slowly slide
To Next Page
Loading...
