15
English
STORAGE & CARE
PROPER STORAGE
Preparing your steamer for storage is quick and simple. When you
have completed your tasks, follow the steps listed below.
1. Push the Power On/Off Button (Steam Status Light will turn off) and
unplug power cord.
2. Allow unit time to cool (at least 30 minutes).
3. Remove Water Tank and drain any remaining water into a sink or tub
to minimize potential mineral build-up. Replace Water Tank when
done.
4. Wrap cord with supplied “hook and loop” strap when storing. Do not
wrap cord around the product.
5. Store steamer in a cool, dry location.
MINERAL BUILD-UP
A common maintenance need for steam appliances is the removal of
build-up caused by high mineral content in many municipal water sup-
plies. This mineral build-up may cause the unit to spit water, limit the
effectiveness and reduce the life of your steamer.
To Next Page
Loading...
