AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm Page
9
4. FAN Speed Selection Key: In cooling and fan mode, press the key to select
high/low wind speed operation. NOTE: this is limited by anti-cold conditions, under
certain conditions, it may not run according to the set wind speed.
5. TIMER Key: Used to pre-set times for turning ON or OFF the appliance.
When powered ON, press the key to set the OFF time.
When powered OFF, press the key to set the ON time.
Press the key, when the timer symbol flashes, press the up or down key to select
the required timer value. Timer values can be set between 1-24 hours and the
timer value is adjusted up or down by one hour.
6. SLEEP: In the cooling mode, press this key to turn on/off the sleep function. The
unit will work in Energy-Saving and quiet mode
NOTE: You can not turn on the sleep mode in the dehumidifying or Fan modes!
REMOTE CONTROL
To Next Page
Loading...