Unboxing and Assembly
12
Shell
RIDE
8- Attach the pedals
The pedals are left and right side specific. The
end near the threads will have an L or R on them,
indicating Left and Right. The right side is threaded
normally, and the left is reverse threaded. This must
be screwed in opposite to the right (to the left).
Thread in by hand and tighten by wrench!
DO NOT CROSSTHREAD!
9- Pump tires to desired pressure
The range for the tires is usually from 5psi to 30psi. You can find this indication on the tire.
i. 5psi is the lowest the tire is rated for.
ii. 15-25psi is the recommended range for most off-road riding, depending on your preferences
and the specific terrain you are traveling.
iii. 25-30psi is for pavement for hard, smooth surfaces.
10- Check all bolts for tightness, including
A. Stem (handlebar and steer-tube bolts)
B. Wheel axles
C. Crank arms
D. Chainring
E. Kickstand
To Next Page
Loading...
General