Display Functions
20
Shell
RIDE
5. General operation
5.1 Power on/off
By pressing and holding the power button, the display will start to work and the working power supply of the
controller will be turned on. In the power-on state, by pressing and holding the power button, your e-bike will
be powered off. In the power-off state, the display will no longer use the battery power, and its leakage current
will be less than 1 uA.
• If your e-bike is not used for more than 10 minutes, the display will be automatically powered off.
5.2 Display interface
After the display is turned on, the display will show the real-time speed (km/h) and the trip distance (km) by
default. By pressing the power button, the information displayed will be switched between the trip distance (km),
ODO (km), maximum speed (km/h) and average speed (km/h). When the distance reaches 9999.9 km, it will
be automatically reset to zero.
To Next Page
Loading...
General