Name: Shelly PRO 1
Brand: Shelly
Rating: 5 (1 reviews)

To Next Page

To Previous Page

• Scripting (mjs) - YES

• MQTT - YES

• CoAP - No

• URL Actions - 20

• Scheduling - 50

• Add-on support - YES

• CPU - ESP32

• Flash - 8MB

• Operational range: (depending on terrain and building structure): up to 50 m

outdoors, up to 30 m indoors

• Electrical consumption: < 3 W

• Working temperature: 0°C - 40°C

• Controlled elements: 1 electrical circuit (max 30 V in DC mode).

• Controlling elements: 1 relay

• Radio signal power: 1mW

• Radio protocol: Wi-Fi 802.11 b/g/n

• Frequency Wi-Fi : 2412-2472 МHz; (Max. 2495 MHz)

• Frequency Bluetooth: TX/RX: 2402-2480 MHz (Max. 2483.5 MHz)

• RF output Wi-Fi: <20 dBm

• RF output Bluetooth: <5 dBm

LED INDICATORS

Power (red): Red light indicator will be on if power is connected.

Wi-Fi (blue): Blue light indicator will be on if the Device is in AP mode.

Wi-Fi (red): Red light indicator will be on if the Device is in STA mode and not

connected to a local Wi-Fi network.

Wi-Fi (yellow): Yellow light indicator will be on if the Device is in STA mode and

connected to the local Wi-Fi network. Not con nected to Shelly Cloud or Shelly Cloud

disabled.

Wi-Fi (green): Green light indicator will be on if the Device is in STA mode and

connected to the local Wi-Fi network and to the Shelly Cloud.

Wi-Fi (ﬂashing): The light indicator will be ﬂashing Red/Blue if OTA update is in

progress.

LAN (green): Green light indicator will be on if LAN is connected.

Output (red): Red light indicator will be on if the Output relay is closed.

Questions and Answers:

Need help?

Do you have a question about the Shelly PRO 1 and is the answer not in the manual?

Shelly PRO 1 Specifications

General