Shelly Wave 1 User Manual

1
Wave 1
Z-Wave® smart switch with potential-free contact
Extended User Guide (EN)
Device: Wave 1
Part number US: QNSW-001X16US
Z-Wave Product type ID: 0x0002
Z-Wave Product ID: 0x0083
Z-Wave Manufacturer: Shelly Europe
Z-Wave Manufacturer ID: 0x0460

Shelly Wave 1 Specifications

General

Brand	Shelly
Model	Wave 1
Category	Switch
Language	English

Summary

4. Electrical diagrams (110-240 V AC / 24-48 V DC / 12 V DC)

4.1 Installation instruction

Step-by-step guide for installing the Z-Wave device with different power supply options.

6. Z-Wave® Adding / Removing / Factory reset

6.1 Adding the Device to a Z-Wave® network (inclusion)

Process of adding a Z-Wave device into a Z-Wave network via a gateway.

6.2 Removing the Device from a Z-Wave® network (exclusion)

Procedure for removing a Z-Wave device from a Z-Wave network.

6.3 Factory reset

7. Z-Wave® Security 2 and Device Specific Key (DSK)

8. LED Signalisation

9. Z-Wave® Parameters

Parameter No. 1 - SW (SW1) Switch type

Defines how the device treats the switch connected to the SW (SW1) terminal.

Parameter No. 17 - Restore state of O (01) after power failure

Parameter No. 19 - O (01) Auto OFF with timer

Parameter No. 20 - O (O1) Auto ON with timer

Parameter No. 120 - Factory Reset

11. Z-Wave® Notifications Command class

11.1 Overheat detected

12. Z-Wave® Associations

14. Technical Specifications