Shelly Wave 1 User Manual

26
12. Z-Wave® Associations
Associations are used for direct communication between the Device and other devices within
your Z-Wave network without the need of the Z-Wave gateway.
Max. number of associated devices per group is 9. This value is fixed and can not be configured.
Each association group supports the association of up to 9 devices (nodes). To avoid network
delays, we recommend limiting the amount of associated devices to no more than 5 per group.
“Lifeline Group” is reserved solely for a gateway and hence only 1 node can be assigned.
Device
Endpoint
Group
triggered
by
reporting
to
Command classes
Wave
1
Root
device
Group 1
(Lifeline)
Device
GW
• INDICATOR_REPORT : LED status
• DEVICE_RESET_LOCALLY_NOTIFICATION :
triggered upon request
• SWITCH_BINARY_REPORT : status change
report for output O (O1)
• NOTIFICATION_REPORT : triggered on
Overheat detected
Wave
1
Root
device
Group 2
(On/Off)
SW
Associated
device
• BASIC_SET : set On / Off state at the
associated device
Wave
1
Root
device
Group 3
(Start/Stop
set level)
SW
Associated
device
• SWITCH_MULTILEVEL_START_LEVEL_CHANGE
: initiate a transition to a new level
• SWITCH_MULTILEVEL_STOP_LEVEL_CHANGE
: stop an ongoing transition

Shelly Wave 1 Specifications

General

Brand	Shelly
Model	Wave 1
Category	Switch
Language	English