Shelly Wave 1 User Manual

EN.
25
11. Z-Wave® Notifications Command class
11.1 Overheat detected
Z-Wave
Notification
Type Name
Z-Wave
Notification
Name
LED colour
status
Device
reaction
Action to restore
Device
specific
Z-Wave
definition
Heat Alarm
Overheat
detected
Check the
RGB LED
signalization
table
Switch OFF all
outputs and
send a
notification
Any of the following
activities reset this
alarm: power cycle, ,
short press on the S
button, press on any
switch/push-button
connected to any SW
(SW, SW1, SW2, …)
terminal.
YES
notification
type=heat alarm
Value=0x04,
event=State
Notificatio
name=Overheat
detected
Value=0x02,
Version=V2

Shelly Wave 1 Specifications

General

Brand	Shelly
Model	Wave 1
Category	Switch
Language	English