Shelly PRO 1 User Manual

USER AND SAFETY GUIDE
1 CIRCUIT WI-FI RELAY SWITCH
SHELLY PRO 1
Read before use
This document contains important technical and safety information about the
device, its safety use and installation.
⚠CAUTION! Before beginning the installation, please read this guide and any other
documents accompanying the device care fully and completely. Failure to follow the
installation procedures could lead to malfunction, danger to your health and life,
violation of the law or refusal of legal and/or commercial guarantee (if any). Allterco
Robotics EOOD is not responsible for any loss or damage in case of incorrect
installation or improper operation of this device due to failure of following the user
and safety instructions in this guide.
Product Introduction
Shelly® is a line of innovative microprocessor-managed devices, which allow remote
control of electric appliances through a mobile phone, tablet, PC, or home
automation system. Shelly® devices can work standalone in a local Wi-Fi network or
they can also be operated through cloud home automation services. Shelly®
devices can be accessed, controlled and monitored remotely from any place the
User has Internet connectivity, as long as the devices are connected to a Wi-Fi router
and the Internet. Shelly® devices have integrated web servers, through which the
user may adjust, control and monitor them. The cloud function could be used, if it is
activated through the web server of the device or the settings in the Shelly Cloud
mobile application. The user can register and access Shelly Cloud using either
Android or iOS mobile application, or with any internet browser at
https://my.shelly.cloud/ Shelly® Devices have two Wi-Fi modes - Access Point (AP)
1

Shelly PRO 1 Specifications

General

Wi-Fi	Yes
Product type	Solid-state relay
Product color	Blue
Frequency band	2.412 – 2.483 GHz
LED indicators	LAN, Power, Wi-Fi
Wi-Fi frequency	2.4 GHz
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity	1 channels
Transmission range	0 - 50 m
Transmitting power	13.35 dBmW
Security algorithms	HTTPS
Maximum indoor range	30 m
Ethernet LAN (RJ-45) ports	1
Operating temperature (T-T)	-20 - 40 °C
Maximum current	16 A
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	3 W

Weight and Dimensions

Dimensions (WxDxH)	18.5 x 68.5 x 89.5 mm

Summary

Introduction and Safety

Read Before Use

Crucial safety and technical information for safe operation and installation.

Installation Instructions

Wiring Configurations and Safety

AC Wiring Examples

Instructions for connecting AC power with AC or DC load circuits.

DC Wiring Examples

Instructions for connecting 12V DC power with AC or DC load circuits.

Device Setup and Specifications

Initial Inclusion Guide

Guide for connecting the device to Shelly Cloud via app or web.

Device Inclusion Process

Wi-Fi Access Point Setup

Step 1: Shelly Pro 1 creates its own Wi-Fi Access Point (AP).

Mobile App Inclusion Steps

Step 2: Enabling phone settings and proceeding with app inclusion.

Device Configuration and Settings

Cloud Connection and Control

Connecting to Shelly Cloud for remote control and settings management.

Internet Connectivity Options

Configuring Wi-Fi networks (1 & 2) and Access Point mode.

Advanced Settings and Interface

Application and Device Settings

Embedded Web Interface Access

Configuration Options

Timers, Schedules, and Webhooks

Device and Network Settings