EN.
15
8. LED Signalisation
General rules
• Switching between Normal and Settings mode is done by pressing the S button once.
• Solid LED means that you are in Setting mode (this does not apply to plugs). Once you are
in Setting mode, it automatically switches to Normal mode after 10s.
• If the LED is not in Alarm mode, it will turn off after a timeout of 30 min (this does not
apply to plugs). Press on the S button or Device power cycle wakes the LED up for 30 min.
Normal mode LED status: Normal mode is defined by a stable device function that can last
infinitely long.
To Next Page
Loading...
