Shelly Wave i4 - Parameter No. 3 - SW3 Switch Type; Parameter No. 4 - SW4 Switch Type; Parameter No. 105 - LED Signalisation Intensity

15
• 1 - toggle switch (contact closed - ON / contact opened - OFF),
• 2 - toggle switch (device changes status when switch changes status)
Parameter No. 3 - SW3 Switch type
This parameter defines how the Device should treat the switch (which type) connected to the
SW3 terminal.
Value size: 1 Byte
Default value: 0
Values & descriptions:
• 0 - momentary switch (push button),
• 1 - toggle switch (contact closed - ON / contact opened - OFF),
• 2 - toggle switch (device changes status when switch changes status)
Parameter No. 4 - SW4 Switch type
This parameter defines how the Device should treat the switch (which type) connected to the
SW4 terminal.
Value size: 1 Byte
Default value: 0
Values & descriptions:
• 0 - momentary switch (push button),
• 1 - toggle switch (contact closed - ON / contact opened - OFF),
• 2 - toggle switch (device changes status when switch changes status)
Parameter No. 105 - LED Signalisation intensity