7
⚠CAUTION! Do not insert multiple wires into one terminal.
⚠RECOMMENDATION: Place the antenna as far away as possible from metal elements as they
can cause signal interference.
⚠RECOMMENDATION: Connect the Device using solid single-core cables or stranded cables
with ferrules. The cables should have insulation with increased heat resistance, not less than
PVC T105°C (221°F).
Connect a switch or a button to a “SW” terminal of the Device and the Live terminal as shown
on fig. 1-2. Connect the Live wire to an “L” terminal and the Neutral wire to the “N” terminal of
the Device.
5. About Z-Wave®
The Z-Wave® protocol is an interoperable, wireless, RF-based communications technology
designed specifically for control, monitoring, and status reading applications in residential and
light commercial environments. Mature, proven, and broadly deployed, Z-Wave® is by far the
world market leader in wireless control, bringing affordable, reliable, and easy-to-use 'smart'
products to millions of people in every aspect of daily life.
Interoperability has always been at the core of the Z-Wave® protocol, alongside the features
like backward compatibility, security, and reliability. All Z-Wave® devices can be operated in any
Z-Wave® network with other Z-Wave® certified devices, regardless of brand or manufacturer.
All mains operated nodes within the network will act as repeaters regardless of vendor to
increase the reliability of the network. There are 4000+ Z-Wave certified products that are
backwards- and forwards-compatible in the Z-Wave® ecosystem and well over 100 million
devices currently in the market.
With over 20 years in the marketplace, Z-Wave® technology has best-in-class security measures
to keep your home network smarter and safer.
Source: www.z-wavealliance.org, http://www.z-wave.com
Z-Wave® Adding / Removing / Factory reset
6.1 Adding the Device to a Z-Wave® network (inclusion)
Note! In case of Security 2 (S2) adding (inclusion), a dialog will appear asking you to enter the
corresponding PIN Code (5 underlined digits) that are written on the Z-Wave® DSK label on the
side of the Device and on the Z-Wave® DSK label inserted in the packaging.
IMPORTANT: The PIN Code must not be lost.
To Next Page
Loading...
Need help?
General
