Shenchen Pump LabV Series
EasypumpI use as two channels, or with 3 or 4 EasypumpI pump heads, need to
select single pump head EasypumpI, as in below picture:
4.5 Back Suction Angle Interface
The back suction angle interface as below:
Click the System Settings button in the main interface, then click Back Suction
button to enter the back suction angle setting interface. Click angle button, pop up
the numeric keyboard for input the suction angle, enter back suction angle then click
OK. If click the Cancel button, it will back to the system settings main interface.
To Next Page
Loading...