Do you have a question about the Sherwood NewCastle R-945 and is the answer not in the manual?
power output (stereo mode, 8 Ohm, THD 0.2%, 20 Hz~20 kHz) | 2 x 100 W |
---|---|
total harmonic distortion (8 Ohm, 100 W, 1 kHz) | 0.09 % |
intermodulation distortion (60 Hz* 7 kHz='4:1- SMPTE, 8 Ohm, 100 W) | 0.1 % |
phono input sensitivity | 3.5 mV |
---|---|
line input sensitivity (CD, TAPE, VIDEO) | 200 mV |
input sensitivity (47 kOhm) | 47 kOhm |
output level (TAPE REG) | 2.0 V |
---|---|
pre out (front, center, rear, subwoofer) | 1 kOhm |
bass/treble control (100 Hz/10 kHz) | +10 dB |
sampling frequency | 32, 44.1, 48 kHz |
---|---|
digital input level (coaxial) | 0.5 Vp-p |
digital input level (optical) | -15~-21 dBm |
power supply | AC 230 V, 50 Hz |
---|---|
power consumption | 850 W |
dimensions (W x H x D) | 440 x 140 x 380 mm (17-3/8 x 5-1/2 15 inches) |
weight (net) | 16.3 kg (35.9 lbs) |
---|---|
switched AC outlet | 100 W max. |
total weight | 16.3 kg |