CRUISE CONTROL SWITCH
WARNING: TO AVOID INJURY, THE SWITCH
SHOULD NOT BE PUT IN THE“ON POSI-
TION WHEN OPERATING AT TRANSPORT
SPEED OR WHEN IN REVERSE.
The cruise control switch A, may be used to
maintain a constant forward speed when
desired. After attaining the desired speed with
the forward travel pedal, put the switch to
the“ON”position, and the unit will maintain the
set speed even if the pedal in released.
To cancel the speed setting or stop the unit, put
the cruise control switch to the“OFF”position or
firmly depress the master brake pedal.
HST RANGE SELECTOR LEVER
Range Selector Lever and Four-Wheel Drive
(FWD) Selector Lever are activated by the same
lever.
The range selector lever A, on the left side of
the seat, can be shifted when the HST foot
pedal is in the Neutral position to select, High
range (“H”), Low range (“L”) or Neutral.
Range Forward Reverse
Low km/h 0-10.0 0- 6.5
High Km/h 0-24.5 0-15.8
2-8
OPERATION
To Next Page
Loading...
