AIR CLEANER
The air cleaner is accessed by opening the
tractor hood.
The air cleaner assembly contains two
elements: an outer primary element and an inner
safety element.
To remove the primary element, loosen the
spring clamps and remove the end cap from the
air cleaner body to expose the primary element.
Air Cleaner Primary Element
NOTE: Clean the primary element after every
100 hours of service. Extremely dusty
conditions may require more frequent
service intervals.
1. Pull the primary element from the canister.
Clean any loose dirt from the canister and
inspect the end of the canister for dirt which
may prevent the new element from sealing
properly.
2. Clean the primary element using low air
pressure (207 kPa or less). Blow dust from
the inside to the outside of the element
(opposite to normal air flow through element).
IMPORTANT: Be careful not to rupture the filter
element. Maintain a safe distance between the
air nozzle and the filter element when directing
air up and down the clean air side of the
element pleats.
3-10
LUBRICATION AND MAINTENANCE
To Next Page
Loading...
