Shihlin electric SE3 Series Instruction Manual

Command
Function
ANI
Used for the series connection of normally closed contacts. Perform an AND operation between the
current state of the serial connection point and the logical result before the connection point, and store
the operation result.
Operand
X
Y
M
T
C
D
OK
OK
OK
OK
OK
NO
Ladder： Command：
LD X0
ANI X1
OUT Y0
Command
Function
OR
Used for parallel connection of normally open contacts. Perform OR operation on the branch logic
result of the parallel connection point and store the operation result.
Operand
X
Y
M
T
C
D
OK
OK
OK
OK
OK
NO
Ladder： Command：
LD X0
OR X1
OUT Y0
Command
Function
ORI
Used for parallel connection of normally closed contacts. The logical result of the parallel connection
point is subjected to an "or" operation, and the operation result is stored.
Operand
X
Y
M
T
C
D
OK
OK
OK
OK
OK
NO
Ladder： Command：
LD X0
ORI X1
OUT Y0
X0
Y0
X1
Y0
X0
X1
Y0
X0
X1

Shihlin electric SE3 Series Specifications

General

Brand	Shihlin electric
Model	SE3 Series
Category	Inverter
Language	English