Shihlin electric SE3 Series Instruction Manual

Command
Function
ANB
This instruction has no operands. During calculation, the calculation result before the contact and the
current parallel circuit result are "ANDed".
Operand
None
Ladder： Command：
LD X0
OR X1
LD X2
OR X3
ANB
OUT Y0
Command
Function
ORB
This instruction has no operands. During operation, the result of the previous operation and the result
of the current series are ORed.
Operand
None
Ladder： Command：
LD X0
AND X1
LD X2
AND X3
ORB
OUT Y0
Y0
X0
X1
X2
X3
ANB
Y0
X0
X2
X1
X3
ORB

Shihlin electric SE3 Series Specifications

General

Brand	Shihlin electric
Model	SE3 Series
Category	Inverter
Language	English