Shihlin electric SE3 Series Instruction Manual

X
Y
M
K
T
C
D
S1
O
O
O
O
S2
O
O
O
O
S
O
O
O
O
D
O
O
Flag bit: none
S1
: The lower limit of the area comparison.
S2
: The upper limit of the area comparison.
S
: Comparison
value.
D
: Comparing results.
The value of
S1
must be less than the value of
S2
. The result of the comparison is shown by
D
.
If the target points to M0, it will automatically occupy M0~M2.
The ZCP instruction is executed when X0 is ON. When X0 is OFF, ZCP is not executed, and the state remains as before
X0 is OFF.

Shihlin electric SE3 Series Specifications

General

Brand	Shihlin electric
Model	SE3 Series
Category	Inverter
Language	English