Shimadzu AGS-10kNX - Jog Speed

Chapter 4 Operating Panel
4-35
3. Jog Speed
 Setting the Jog Speed
Sets the speed of crosshead movement during jog operations.
[Setting Procedure]
[Setting Value (1)]
• Low Speed Sets the low-speed jog speed.
• High Speed Sets the high-speed jog speed.
[Setting Value (2)]
• Low Speed Enters the low-speed jog speed.
• High Speed Enters the high-speed jog speed.
Parameter
Default Value
Setting Range
Low-Speed
1 mm/min
0.001 mm/min
to high speed value
High-Speed
500 mm/min
low speed value to
1000 mm/min
Jog Speed
Low Speed
(1)
(2)
Jog Speed
>Low Speed
10.00 mm/min
SYSTEM