To Next PageTo Next Page
Need help?Do you have a question about the Shimadzu AA-6800F and is the answer not in the manual?
General| Brand | Shimadzu |
|---|---|
| Model | AA-6800F |
| Category | Measuring Instruments |
| Language | English |
Comprehensive precautions for safe operation of the atomic absorption spectrophotometer.
Safety measures for handling high-pressure gas cylinders used with the instrument.
Procedures to follow in the event of a fuel gas leak detected by the instrument.
Safety guidelines for handling and disposing of hollow cathode lamps.
Safety guidelines for handling and disposing of deuterium lamps.
Procedures for safely handling and disposing of waste liquid generated during measurements.
Explanation of warning labels found on the equipment and their meanings.
Steps to take in case of an emergency or abnormal condition with the instrument.
Steps for inspecting the instrument after a flashback incident occurs.
Instructions for safely moving or transporting the AA-6800/6650 instrument.
Warning about measuring explosive samples due to potential risks.
List of service parts, their replacement intervals, and checking procedures.
Daily checklist items to ensure safety and proper functioning before operation.
Information regarding the disposal of electronic equipment in the European Union.
Compliance information related to European directives for the product.
Information on the instrument's compliance with electromagnetic compatibility standards.
General introduction to the AA-6800/6650 atomic absorption spectrophotometer.
Technical specifications and performance characteristics of the AA-6800/6650.
Verification of included standard accessories and system configurations.
Guidelines for selecting an appropriate installation site and placement of the instrument.
Necessary power, water supply, and gas requirements for operating the instrument.
Step-by-step instructions for assembling the AA-6800/6650 instrument components.
Procedure for correctly mounting a hollow cathode lamp into the instrument.
Instructions for installing the ACF-6800 flame unit as an accessory.
Overview of the main unit's configurations and operation switches.
Procedures for powering on the hardware and starting the instrument software.
Step-by-step guide to basic operations using the software's Wizard function.
Detailed steps for performing measurements using both manual and automated methods.
Procedures and safety precautions for igniting and extinguishing the flame.
Explanation and procedures for using standard addition and simple standard addition methods.
Specific conditions and procedures for performing flame emission analysis.
How to optimize fuel gas flow rate and burner height for improved sensitivity.
Overview of the Wizard selection dialog box and its available options.
Functions related to file management, including opening, saving, and exporting data.
Summary of parameter setup functions and available Wizards.
Detailed settings for individual measurement parameters outside of the Wizard.
Functions related to controlling and configuring the instrument hardware.
Accessing help resources and software information.
Procedures for adjusting the burner and furnace positions for optimal performance.
Cleaning and maintenance procedures for the burner head and nebulizer.
Methods for checking gas lines for leaks to ensure safe operation.
Step-by-step guide for replacing the deuterium lamp.
List of replacement parts and their recommended replacement intervals.
Table of recommended measurement conditions for various elements in flame analysis.
Guidance on selecting the appropriate graphite tube type for furnace measurements.
Troubleshooting guide listing error messages and their corresponding remedial measures.
